The Nokia 3.2 is a budget-friendly smartphone that runs on the Android One operating system. With its clean and stock Android experience, users can enjoy faster Android upgrades and a rich collection of tweaks. However, if these customizations are not executed properly, it can lead to a bootloop or a bricked device. But don’t worry, there’s a handy way to bring your Nokia 3.2 back to life – by triggering the Emergency Download Mode (EDL Mode).
EDL Mode is an alternate download mode specifically designed for devices with Qualcomm chipsets. It allows you to flash stock firmware using an OEM-specific tool, effectively restoring your device. In this guide, we will show you how to trigger the EDL Mode on your Nokia 3.2 device, step by step.
Precautions and Requirements
Before we begin, it’s important to note that triggering the EDL Mode should only be done if your device is bricked or if you are unable to flash partition files due to the grayed-out “Allow OEM Unlock” toggle. Additionally, please be aware that the Nokia 3.2 00EEA build may have different test points compared to other variants, and the Nokia 3.2 V might have removed these test points altogether. Keep these points in mind as we proceed with the steps.
Step 1: Power off your device and remove the SIM tray
To start the process, power off your Nokia 3.2 device. Once it is powered off, carefully remove the SIM tray from the device.
Step 2: Remove the back cover and screws
Next, remove the back cover of your Nokia 3.2 device. This will give you access to the internal components. Once the back cover is removed, you will see a number of screws on the top. Use a suitable screwdriver to remove these screws.
Step 3: Access the motherboard and remove the battery
With the screws removed, you can now access the motherboard of your Nokia 3.2 device. Take caution while handling the internal components. Before proceeding, remove the battery from the device.
Step 4: Trigger the EDL Mode using test points
Now comes the crucial step of triggering the EDL Mode on your Nokia 3.2 device. Use a pair of tweezers to carefully connect to the test points. The test points for triggering the EDL Mode on the Nokia 3.2 device are shown in the image above. Please ensure that you connect the tweezers to the correct test points.
Step 5: Connect your device to the PC
Once you have successfully connected to the test points, it’s time to connect your Nokia 3.2 device to your PC using a USB cable. Make sure the other end of the cable is connected to a USB port on your computer.
Step 6: Recognize the connected device and proceed
After connecting your device to the PC, the computer should recognize the connected Nokia 3.2 device. If the recognition is successful, you can proceed to unlock the device’s bootloader and carry out the necessary flashing of files.
Conclusion
In this guide, we have explained how to trigger the Emergency Download Mode (EDL Mode) on your Nokia 3.2 device. By following the steps outlined above, you can bring your device back to life if it is bricked or if you are unable to flash partition files. Remember to exercise caution while handling the internal components of your device and ensure that you connect to the correct test points. If you have any queries or require further assistance, please let us know in the comments section below.
Experiencing difficulties with your Device, check out our “How To” page on how to resolve some of these issues.
