Samsung recently revealed a range of new Galaxy Phones for the year 2020. Among those to steal the show were the Galaxy Z Slip and the Galaxy S20 Ultra.
The Galaxy S20 will have three variants: the 6.2-inch Galaxy S20, the 6.7-inch Galaxy S20 plus and the 6.9-inch Galaxy S20 Ultra. The prices of these phones start at $1000, $1200 and $1400 respectably. Of the three variants, the S20 Ultra has the most advanced camera setup. The difference between the three variants respectively are:
The Samsung Galaxy S20:
This is the most basic S20 model in the lineup. It will come with a 6.2 inch OLED display. The resolution of this smartphone is Quad HD. The three cameras on the back will be of 12MP+64MP+12MP and the camera in the front will be of 10MP. It will run with an Exynos 990 processor chip. The RAM of the phone will be either 8GB or 12GB, depending on the variant which you are purchasing. It will come with an internal storage of 128GB. The battery will be 4000 mAh which is considerably good. It is rated IP68 water-resistant. There will be an optional 5G variant available as well. The phone will start from a range of $1,349.
The Samsung Galaxy S20+:
This is a variant which is a grade above the base model S20. It will come with a 6.7 inch OLED display. The resolution again will be Quad HD. There is no difference in the back and front cameras except that there will be an added ToF Feature on the back camera. Again, it will run on an Exynos 990 processor. The RAM variant will depend on you whether you purchase the 8GB or 12GB variant. The internal storage will come in two options of 128GB and 512GB. There will be an increased battery size of 4500 mAh. The phone will be IP68 water resistant naturally. A 5G model is again an option that you have to take whether you want to purchase that one or not. It will start at $1,499.
The Samsung Galaxy S20 Ultra:
This is the best and most powerful variant in the series of S20. It will come with a 6.9 inch OLED display. The resolution will be the same – Quad HD. But there is a huge difference in the back cameras. The back cameras will be 108MP+48MP+12MP+ToF. If you are wondering about the front camera, it will have a 40 MP camera. The phone will run on Exynos 990 processor only. There will be two RAM variants available for you to choose from – 12GB and 16GB. The internal storage again will come in two options – 128GB and 512GB. If you are thinking about the battery, the battery is again upgraded to 5000 mAh, which means your device will run for a long period than usual. The phone is IP68 water-resistant. It will be 5G only and it will start from a price of $1,999.
All of the three smartphones have some great features and that is why they are priced this high. It is hard to determine if paying almost $1,999 for a smartphone is worth it or not, but one thing is sure that the quality you will get will be high.
Instructions on How To Set Up Samsung DeX Samsung Galaxy S20 / S20+ / S20 Ultra:
Using the DeX Cable:
Dex Cable supported devices:
Galaxy Note 9, Galaxy Tab S4
Connect the USB-C end of the DeX Cable to the port on the mobile device, and then connect the HDMI end into a TV or monitor’s HDMI port.
If you want to use a keyboard and a mouse, you can connect bluetooth devices directly to the mobile device to use them in Samsung DeX.
Your mobile devices’ screen should appear on the monitor. Unlock the device if you have a screen lock. A popup message will display on your Home screen. Touch OK to allow access to Full Desktop mode. Next, a Samsung DeX notification will appear. Read the introductions and instructions on the monitor. When you’re done, select I agree to the Terms and Conditions above, and then select Start.
You can use the mobile device’s screen as a touchpad and keyboard.
Using the DeX Pad or Station
Dex Pad supported devices:
Galaxy S9, Galaxy S9+, Galaxy Note 8, Galaxy S8, Galaxy S8+, Galaxy S8 Active
Dex Station supported devices:
Galaxy S8, Galaxy S8+
You are going to ace that research project when you can work on it from the big screen. There’s two things you need to do:
Connect the DeX Pad or Station to the Fast Charging Travel adapter that came with the phone. Connect one end of an HDMI cable to the DeX’s HDMI port, and then connect the other end into a TV or monitor’s HDMI port.
Then connect your phone to the DeX Pad or Station. If your phone has a case on, make sure you take it off before connecting as it may cause connection issues. If you want to use a keyboard and a mouse, connect them to the USB ports on the DeX. You can also connect Bluetooth devices, such as a Bluetooth keyboard and mouse.
When using the DeX Station slide the cover open and mount the phone onto the USB-C connector.
Once everything is connected successfully, select the screen mode you want to use. You can select Samsung DeX or Screen mirroring mode.
START SAMSUNG DeX: The phone’s screen will turn off and appear on the connected TV or monitor in desktop mode.
SWITCH TO SCREEN MIRRORING: The same screen as the phone will appear on the connected TV or monitor.
Samsung DeX Settings:
When you connect your mobile device to a DeX product, Samsung DeX Settings are added to your Settings list. To access it, select Settings from the Home screen, and then select Samsung DeX. From here, you can customize your wallpaper or screen resolution for Samsung DeX, access keyboard and mouse settings, try new features in advance with Samsung DeX Labs, or learn how to use Samsung DeX. Let the exploring begin!
Experiencing difficulties with your Android Device, check out our “How To” page on how to resolve some of these issues.
Other Android Technical Reviews:- Android
