Download Xiaomi Redmi 12 Android 14 (HyperOS / MIUI 15) update

The Xiaomi Redmi 12 is an impressive budget-friendly smartphone that offers a range of features and excellent performance. With its 6.79-inch FHD+ AMOLED display, powerful MediaTek Helio G88 processor, and 5000mAh battery, it’s a device that many users are excited about. If you’re a Xiaomi Redmi 12 user and want to experience the latest Android 14 update, you’re in luck. Xiaomi has rolled out the HyperOS ROM based on Android 14 for the Redmi 12, and in this guide, we’ll walk you through the process of downloading and installing it.

Xiaomi Redmi 12 Device Overview:

Before we dive into the installation process, let’s take a closer look at the Xiaomi Redmi 12 device itself. The Redmi 12 is equipped with a 6.79-inch FHD+ AMOLED display with a 90Hz refresh rate, ensuring smooth and vibrant visuals. It also features Corning Gorilla Glass Victus protection, providing excellent durability.

Under the hood, the Redmi 12 is powered by the MediaTek Helio G88 processor, which offers impressive performance for multitasking and gaming. It comes with up to 8GB of RAM and 256GB of internal storage, providing ample space for all your apps, games, and media files. Additionally, the device supports memory extension up to 16GB, allowing you to expand your storage even further.

In terms of camera capabilities, the Redmi 12 boasts a 50MP AI triple camera setup on the back. This setup includes a main camera, an ultra-wide camera, and a macro camera, enabling you to capture stunning photos in various scenarios. On the front, there’s a 32MP selfie camera, perfect for taking high-quality self-portraits and video calls.

One of the standout features of the Redmi 12 is its large 5000mAh battery, which supports 67W wired charging and 50W wireless charging. This means you can quickly recharge your device and enjoy long hours of usage without worrying about running out of battery. The Redmi 12 also features a premium glass back design with IP53 dust and splash resistance, providing added durability and protection. It comes in four attractive colors: gray, blue, purple, and green.

Now that we’ve covered the device overview, let’s move on to the process of installing the HyperOS ROM on your Xiaomi Redmi 12.

Flash HyperOS on Redmi 12 using Fastboot

The HyperOS ROM is a new and optimized version of MIUI that is based on the Android 14 operating system. It offers improved performance, enhanced security, dynamic visuals, and a cleaner user experience. To install the HyperOS ROM on your Redmi 12 using the fastboot method, follow the steps below:

Requirements:

Before you begin the installation process, make sure you have the following requirements in place:

1. Ensure that your Xiaomi Redmi 12 is sufficiently charged to avoid any interruptions during the installation process.
2. Prepare a computer with a stock USB data cable for connecting your device.
3. Take a full backup of your data from the phone to prevent any loss during the flashing process.
4. Install ADB and Fastboot Tools on your computer. If you haven’t already done so, you can find a guide on how to install them here.

Step 1: Enable USB Debugging and OEM Unlocking

To begin, you’ll need to enable USB Debugging and OEM Unlocking on your Xiaomi Redmi 12. This will allow your device to be recognized by the computer and proceed with the fastboot method. Here’s how you can enable these options:

1. Open the Settings app on your Redmi 12.
2. Scroll down and tap on the “About Phone” option.
3. Locate the “MIUI version” and tap on it seven times. This will enable the Developer Options menu on your device.
4. Go back to the main Settings menu and search for “Developer Options”.
5. Open Developer Options and enable the “USB Debugging” option.
6. Turn on the “OEM Unlock” toggle and confirm the action when prompted.

Step 2: Unlock Bootloader

Before flashing any custom ROM, it’s necessary to unlock the bootloader of your device. This process will wipe all data from your device, so ensure you have taken a complete backup before proceeding. Follow the steps below to unlock the bootloader of your Xiaomi Redmi 12:

1. Download the Mi Unlock Tool on your computer from the official Xiaomi website.
2. Extract the downloaded zip file and run the application.
3. Sign in with your Mi Account credentials. If you don’t have one, you can create a new account.
4. Power off your Redmi 12 and then press and hold the Volume Down + Power buttons to enter Fastboot mode.
5. Connect your device to the computer using a USB cable.
6. Once the Mi Unlock Tool detects your connected handset, click on “Unlock” and wait for the process to complete.
7. A confirmation pop-up will appear, click on “Unlock anyway” to proceed.
8. Your device data and settings will be wiped during the unlocking process.
9. Once the process is complete, you’ll receive a message saying “Unlocked successfully.”
10. Click on the “Reboot phone” button to restart your device.
11. Disconnect the USB cable from your device.

Step 3: Download Xiaomi HyperOS ROM

Now it’s time to download the HyperOS ROM for your Xiaomi Redmi 12. Follow the steps below to download the ROM file:

1. Visit the official Xiaomi website or trusted ROM hosting platforms to find the latest HyperOS ROM for the Redmi 12.
2. Look for the appropriate ROM version for your device model and download it to your computer.
3. Make sure to save the ROM file in a location that is easily accessible.

It’s important to note that different ROM versions may have different features and bug fixes. Therefore, it’s recommended to download the latest version available for the best experience.

Step 4: Boot to Fastboot Mode

To proceed with the firmware flashing, you’ll need to boot your Xiaomi Redmi 12 into Fastboot Mode. Follow the steps below to enter Fastboot Mode:

1. Connect your Redmi 12 to the computer using a USB cable.
2. Ensure that USB Debugging is enabled on your device.
3. Open the platform-tools installation folder on your computer.
4. In the folder’s address bar, type “CMD” and press Enter to launch Command Prompt.
5. In Command Prompt, execute the following command to boot your device into Fastboot Mode:adb reboot bootloader
6. Once your device enters Fastboot Mode, run the following command to check if the fastboot connectivity is established:fastboot devices
7. If your device is listed, you can proceed with the flashing process. If not, install the appropriate Android USB Driver on your computer and try again.

Step 5: Flash HyperOS ROM via Fastboot

Now that your device is in Fastboot Mode and the connectivity is established, you can proceed with flashing the HyperOS ROM on your Xiaomi Redmi 12. Follow the steps below:

1. Ensure that you have already downloaded the HyperOS ROM file on your computer.
2. Double-click on the “windowsfastbootfirstinstallwithdataformat.bat” file to launch it.
3. The firmware flashing process will begin. Please refrain from touching the device or data cable during this process to avoid any interruptions.
4. Wait patiently for the process to complete. Once finished, your Redmi 12 will automatically boot into the HyperOS ROM.
5. The first boot may take some time, so be patient.
6. Once the device boots into the system, go through the initial setup process to reach the home screen.
7. Congratulations! You have successfully installed the HyperOS ROM on your Xiaomi Redmi 12. Enjoy the new features and improved performance.

Flash HyperOS on Redmi 12 using Recovery

If you prefer to install the HyperOS ROM on your Xiaomi Redmi 12 using the recovery method, follow the steps below:

Step 1: Requirements

Before you begin the installation process, ensure that you have the following requirements in place:

1. Install Android SDK Platform Tools on your computer.
2. Charge your device to a minimum of 50% battery.
3. Take a full backup of your data from the handset.
4. Prepare a computer with a stock USB data cable.

Step 2: Allow USB Debugging and OEM Unlocking

Enable USB Debugging and OEM Unlocking on your Xiaomi Redmi 12 by following the steps mentioned earlier in the fastboot method.

Step 3: Unlock Bootloader

Unlock the bootloader of your Xiaomi Redmi 12 using the Mi Unlock Tool, as described in the fastboot method.

Step 4: Download HyperOS ROM

Download the HyperOS ROM for your Xiaomi Redmi 12 from the official Xiaomi website or trusted ROM hosting platforms. Save the ROM file to a location that is easily accessible on your computer.

Step 5: Boot to Fastboot Mode

Boot your Redmi 12 into Fastboot Mode by following the steps outlined earlier in the fastboot method.

Step 6: Flash HyperOS ROM via Recovery

To install the HyperOS ROM using the recovery method, you’ll need to have a custom recovery like TWRP installed on your device. Here’s how you can proceed:

1. Visit the official TWRP website or reputable forums like XDA to download the TWRP build compatible with your Redmi 12 model.
2. If the latest TWRP version is not available, try searching for it on the XDA Forum.
3. Use the fastboot method to flash the downloaded TWRP (.img or .zip) file on your device.
4. Boot into the TWRP recovery menu and tap on the “Wipe” button.
5. Choose “Factory reset” and slide the “Swipe to Factory Reset” option to confirm the action.
6. Once the factory reset is complete, go back to the main menu.
7. Tap on the “Install” button and navigate to the downloaded HyperOS ROM file in your device’s storage.
8. Select the Recovery ROM zip file and slide the “Swipe to confirm Flash” option.
9. Wait for the flashing process to complete.
10. After the process is finished, tap on the “Reboot” button.
11. Your device will now automatically boot into the HyperOS ROM.
12. The first boot may take a few minutes, so please be patient.
13. Complete the initial setup process to access the home screen.
14. Congratulations! You have successfully installed the HyperOS ROM on your Xiaomi Redmi 12 using the recovery method.

Conclusion

In conclusion, this comprehensive guide has provided you with the step-by-step instructions for installing the HyperOS ROM on your Xiaomi Redmi 12 to enjoy the new features and improved performance of Android 14. Remember to follow each step carefully and ensure that you meet all the requirements before proceeding. If you have any further questions or encounter any issues during the installation process, feel free to leave a comment below for assistance. Happy flashing!