Download TWRP Recovery for Xiaomi Redmi Note 12 5G

Are you looking to install TWRP Recovery on your Xiaomi Redmi Note 12 5G? In this guide, we will walk you through the step-by-step process to help you install TWRP Recovery on your device quickly and easily. TWRP Recovery is a custom recovery solution for Android devices that allows you to perform various tasks such as flashing custom ROMs, creating backups, and more. By unlocking the bootloader and installing TWRP Recovery, you can unlock the full potential of your Redmi Note 12 5G and customize it to your liking.

Xiaomi Redmi Note 12 5G Device Overview

Before we dive into the installation process, let’s take a closer look at the Xiaomi Redmi Note 12 5G device. The Redmi Note 12 features a 6.67-inch AMOLED panel with a 120 Hz refresh rate, providing a smooth and vibrant display experience. Powered by the Qualcomm Snapdragon 4 Gen 1 processor and equipped with up to 8GB of RAM, this device offers excellent performance for your everyday tasks and gaming needs. It runs on Android 12 with MIUI 13 skin on top, providing a user-friendly interface and a range of features.

In terms of camera capabilities, the Redmi Note 12 5G sports a dual-camera setup at the rear, including a 48 MP primary sensor and a 2 MP depth sensor. On the front, there is an 8 MP wide sensor for capturing high-quality selfies. The device comes in multiple storage options, ranging from 128GB to 256GB, allowing you to store all your photos, videos, and apps without running out of space. With a 5000 mAh battery and 33W quick charging support, you can enjoy long-lasting usage and fast charging capabilities.

TWRP Recovery and its Advantages

TWRP Recovery, short for Team Win Recovery Project, is an open-source software that provides custom recovery solutions for Android devices. What sets TWRP Recovery apart is its user-friendly touchscreen interface, which simplifies the process of installing third-party firmware and creating backups of your system. Here are some of the advantages of using TWRP Recovery on your Redmi Note 12 5G:

• Flashing Custom ROMs: With TWRP Recovery, you can easily flash custom ROMs on your device, allowing you to customize the look and feel of your device and access additional features.
• Modding and Customization: TWRP Recovery enables you to flash modding zip files, such as custom kernels and themes, to further personalize your Redmi Note 12 5G.
• Rooting: TWRP Recovery makes it easy to root your device by flashing SuperSU or Magisk, giving you administrator access to your device’s system and subsystem.
• Nandroid Backup and Restore: TWRP Recovery allows you to create complete system backups, known as Nandroid backups, which can be easily restored in case of any issues or when switching between ROMs.
• Wipe and Clean: TWRP Recovery provides options to wipe and clean your device’s cache, system, and data partitions, helping you resolve performance issues and start fresh when needed.

Now that you understand the benefits of TWRP Recovery, let’s move on to the steps to install it on your Redmi Note 12 5G.

Steps to Install TWRP Recovery on Redmi Note 12 5G

Before you begin the installation process, there are a few pre-requirements that you need to fulfill. Make sure to follow these steps carefully:

Pre-Requirements:

1. Ensure that you are following this guide specifically for the Redmi Note 12 5G model. Trying to install TWRP Recovery on other devices may cause issues.
2. Unlock the bootloader of your Redmi Note 12 5G. You can refer to our detailed guide on how to unlock the bootloader of any Xiaomi device.
3. Prepare a PC or laptop and a USB cable to connect your device to the computer during the installation process.
4. Take a full backup of your device data, including photos, videos, contacts, and other important files. This will ensure that your data is safe in case anything goes wrong during the installation process.
5. Charge your device battery to at least 50% to avoid any interruptions during the installation process.
6. Download the following files and tools to your computer:

• No Verity opt Encrypt
• SuperSU Zip (For root using SuperSU)
• Magisk Zip (For root using Magisk)
• Xiaomi USB Drivers
• ADB and Fastboot (Install these tools on your PC)

Now that you have fulfilled all the pre-requirements, you are ready to proceed with the installation of TWRP Recovery on your Redmi Note 12 5G. Follow the steps below:

Method: ADB and Fastboot Tool

1. Enable Developer Options and USB Debugging on your device. Go to Settings > System > About Phone and tap on the Build Number seven times to enable Developer options. Then, go to Developer options and turn on the toggle for USB debugging.
2. Open the ADB & Fastboot folder on your computer. Press and hold the Shift key and right-click inside the folder to open a command window.
3. Power off your Redmi Note 12 5G. Press and hold the Volume Up + Power buttons together for a few seconds to enter Fastboot mode.
4. Connect your device to the computer using a USB cable.
5. In the command window, type the following code and press Enter to reboot your device into Fastboot mode:

   adb reboot bootloader

6. Once your device is in Fastboot mode, type the following command to check if your device is successfully connected:

   fastboot devices

   If your device is listed, you can proceed to the next step. If not, make sure you have installed the correct USB drivers and that USB debugging is enabled.

7. Now, to install TWRP Recovery on your Redmi Note 12 5G, type the following command and press Enter:

   fastboot flash recovery twrpname.img

   Replace “twrpname.img” with the actual name of the TWRP Recovery image file you downloaded.

8. Wait for the installation process to complete. Once done, you can use the following command to boot into TWRP Recovery:

   fastboot boot twrpname.img

   Again, replace “twrpname.img” with the actual name of the TWRP Recovery image file.

Congratulations! You have successfully installed TWRP Recovery on your Xiaomi Redmi Note 12 5G. Now, let’s proceed to the next step and root your device.

What is Root?

Rooting your smartphone gives you administrator access to the system and subsystem of your device. It allows you to modify system files and apps, giving you complete control over your device. Rooting your Redmi Note 12 5G can unlock a range of benefits and customization options.

The Advantages of Rooting:

Here are some advantages of rooting your Redmi Note 12 5G:

1. Access to System Files: Rooting grants you access to all files on your device, including the files in the root directory. This allows you to make advanced customizations and modifications.
2. Performance Boost: By rooting your device, you can increase the performance of your Redmi Note 12 5G. You can overclock the processor to gain additional speed or underclock it to save battery life.
3. Uninstall Bloatware: Rooting enables you to remove pre-installed apps, also known as bloatware, that often take up valuable storage space and can slow down your device.
4. Ad Blocking: With root access, you can block ads on your device, including those in apps and web browsers, providing a smoother and more enjoyable user experience.
5. Custom ROMs: Rooting allows you to install custom ROMs, which are modified versions of Android. Custom ROMs offer additional features, customization options, and performance improvements.

Now that you understand the advantages of rooting, let’s proceed with the steps to root your Redmi Note 12 5G.

Steps to Root Redmi Note 12 5G

There are multiple methods to root your device, and two popular methods are using SuperSU and Magisk. Here’s how you can root your Redmi Note 12 5G using these methods:

Method 1: Root Redmi Note 12 5G via SuperSU

1. Download the SuperSU zip file from the provided link and transfer it to your device’s internal storage.
2. Boot your device into TWRP Recovery by pressing and holding the Volume Up + Power buttons together.
3. In TWRP Recovery, tap on the “Install” button and navigate to the SuperSU zip file you transferred.
4. Select the SuperSU zip file and swipe to flash it.
5. Once the flashing process is complete, reboot your device.

Congratulations! Your Redmi Note 12 5G is now rooted using SuperSU.

Method 2: Root Redmi Note 12 5G via Magisk

1. Download the Magisk zip file from the provided link and transfer it to your device’s internal storage.
2. Boot your device into TWRP Recovery.
3. In TWRP Recovery, tap on the “Install” button and navigate to the Magisk zip file.
4. Select the Magisk zip file and swipe to flash it.
5. Once the flashing process is complete, reboot your device.

Great! Your Redmi Note 12 5G is now rooted using Magisk.

Conclusion

In this guide, we have walked you through the process of installing TWRP Recovery and rooting your Xiaomi Redmi Note 12 5G. By following these steps, you can unlock the full potential of your device, customize it to your liking, and enjoy additional features and performance improvements. Remember to proceed with caution and take backups before making any changes to your device. If you have any questions or encounter any issues, feel free to leave a comment below. Happy rooting!