Download and Install TWRP Recovery for Xiaomi 13 and 13 Pro

The Xiaomi 13 and 13 Pro are high-end smartphones that were launched in December 2022. These devices boast a large 6.36-inch touchscreen display with a resolution of 1080×2400 pixels and a refresh rate of 120 Hz. Powering these phones is an octa-core Snapdragon 8 Gen 2 processor, coupled with 8GB of RAM and 128GB of internal storage. Running on MIUI 14 based on Android 13, the Xiaomi 13 and 13 Pro come with a 4500mAh battery that supports wireless charging and fast charging. In terms of camera capabilities, these phones feature a triple camera setup on the rear, consisting of a 50-megapixel primary camera, a 10-megapixel camera, and a 12-megapixel camera. For selfies, there’s a 32-megapixel front-facing camera. Other noteworthy features include IP68 dust and water protection, dual-SIM support, and various connectivity options such as Wi-Fi, GPS, Bluetooth, NFC, Infrared, and USB Type-C. The Xiaomi 13 and 13 Pro are available in Ceramic White, Ceramic Black, Flora Green, and Mountain Blue colors.

TWRP Recovery and its Advantages

Team Win Recovery Project, commonly known as TWRP, is open-source software that offers custom recovery solutions for Android devices. One of its key selling points is its user-friendly touchscreen interface, which simplifies the process of installing third-party firmware or creating backups of the existing system. These are tasks that are often not supported by standard recovery images.

Advantages of TWRP Recovery:

• Flash Custom ROM on Xiaomi 13 and 13 Pro using TWRP.
• Flash modding zip files to customize your phone.
• Easily flash and use Xposed Modules using TWRP.
• Simple rooting and unrooting using TWRP Recovery flashable zip SuperSU.
• Install Magisk on Xiaomi 13 and 13 Pro.
• Create and restore Nandroid Backup using TWRP Recovery.
• Access to restore the Nandroid Backup.
• Flash image files using TWRP Recovery on Xiaomi 13 and 13 Pro.
• Remove bloatware using TWRP Recovery on Xiaomi 13 and 13 Pro.
• Underclock and overclock your device.
• Perform wipe actions such as Cache and Data.

Steps to Install TWRP Recovery on Xiaomi 13 and 13 Pro

Before proceeding with the installation process, make sure to follow the pre-requirements mentioned below:

Pre-Requirements:

1. The installation files and guide are specifically designed for the Xiaomi 13 and 13 Pro models only. Do not attempt to use them on other devices.
2. Ensure that the bootloader of your Xiaomi 13 and 13 Pro is unlocked. You can refer to this guide on how to unlock the bootloader of any Xiaomi device.
3. Prepare a PC or laptop along with a USB cable.
4. Create a full backup of your device data (without rooting) to avoid any potential data loss during the process.
5. Charge your device battery to its full capacity.
6. Download the following required files:

• No Verity opt Encrypt
• SuperSU Zip (for root using SuperSU)
• Magisk Zip (for root using Magisk)
• Xiaomi USB Drivers
• ADB and Fastboot

TWRP Recovery Details

Here are the details of the TWRP Recovery files for Xiaomi 13 and 13 Pro:

Disclaimer: Please note that KrispiTech will not be responsible for any damage or errors that may occur during or after the installation process. Make sure to take a complete backup of your device before proceeding. Perform these steps at your own risk.

Method: ADB and Fastboot Tool

Once you have downloaded all the necessary files, drivers, and tools, follow the installation process outlined below:

1. Enable the Developer Options and USB Debugging mode on your Xiaomi 13 and 13 Pro device. To do this, go to Settings >System >About Phone. Tap on the Build Number seven times to enable Developer options mode. Then, go to the Developer options in the Settings menu and turn on the toggle for USB debugging.
2. Open the ADB & Fastboot folder on your computer. Press and hold the Shift key and right-click to open the command window.
3. Turn off your Xiaomi 13 and 13 Pro device. Press and hold the Volume Up + Power button together for a few seconds to enter Fastboot mode.
4. Connect your device to the PC using a USB cable. In the command window, type the following code and hit enter:adb reboot bootloader
5. Verify that your device is connected successfully as a fastboot device by typing the following command and pressing enter:fastboot devices
6. To install TWRP Recovery on your phone, type the following command and press enter:fastboot flash recovery twrpname.img. Replacetwrpname.img with the actual file name of the TWRP Recovery image.
7. If you only want to boot into TWRP temporarily, you can use the commandfastboot boot twrpname.img.
8. Congratulations! You have successfully installed TWRP Recovery on the Xiaomi 13 and 13 Pro devices. Now, you can proceed to flash the root.